Electricity Metering C12 1993 Edition

• C12.1-1988 American National Standard Code for Electricity Metering
• C12.4-1984 (Reaff 1990) American National Standard for Mechanical Demand Registers
• C12.5-1978 American National Standard for Thermal Demand Meters
• C12.6-1987 (Reaff 1992) American National Standard for Marking and Arrangement of Terminals for Phase-Shifting Devices used in Metering
• C12.7-1987 American National Standard Requirements for Watthour Meter Sockets
• C12.8-1981 (Reaff 1991) American Nationsl Standard for Test Blocks and Cabinets for Installation of Self-Contained A-Base Watthour Meters
• C12.9-1987 American National Standard for Test Switches for Transformer-Rated Meters
• C12.10-1987 American National Standard for Elctromechanical Watthour Meters
• C12.11-1987 American National Standard for Instrument Transformer for Revenue Metering, 10kV BIL through 350kV BIL (0.6 NSV Through 69kV NSV)
• C12.13-1991 American National Standard Electronic Time-of-use Registers for Electricity Meters
• C12.14-1982 (Reaff 1987) American National Standard for Magnetic Tape Pulse Recorders for Electricity Meters
• C12.15-1990 American National Standard Solid-state Demand Registers for Elctromechanical Watthour Meters
• C12.16-1991 American National Standard for Solid-State Electricity Meters
• C12.17-1991 American National Standard or Cartridge-Type Solid-state Pulse recorders for Electricity Metering

Power Capacitors 1994 Edition

• IEEE Std 18 Standard for Shunt Capacitors
• IEEE Std 824 Series Capacitor in Power Systems
• IEEE Std 1036 Guide for Application of Shunt Power Capacitors
• ANSI/IEEE Std C37.012 Application Guide for Capacitance Current Switching for AC High Voltage Circuit Breakers rated on a Symmetrical Current Basis
• ANSI/IEEE C37.99 Guide for Protection of Shunt Capacitor Banks
• Bibliography on Shunt Power capacitors 1975-1991
• Bibliography on SeriesPower capacitors 1975-1991

Engineering in Safety, Maintenance and Operation of Lines (ESMOL) 1993 Edition

• IEEE Std 516-1987 Guide for Maintenance Methods on Energized Power-Lines (ANSI)
• IEEE Std 524-1992 Guide to the Installation of Overhead transmission Line Conductors
• IEEE Std 644-1987 Standard Procedures for Measurement of Power frequency Electric and Magnetic Fields from AC Power Lines (ANSI)
• IEEE Std 738-1986 Standard for Calculation of Bare Overhead Conductor Temperature and Ampacity under Steady State Conditions (ANSI)
• IEEE Std 935-1989 Guide on Terminology for Tools and Equipment to be used in Live-Line Working (ANSI)
• IEEE Std 957-1987 Guide for Cleaning Insulators (ANSI)
• IEEE Std 978-1984 (Reaff 1991) Guide for In-Service Maintenance and Electrical Testing of Live-Line Tools (ANSI)
• IEEE Std 1048-1990 Guide for Proective Grounding of Power Lines (ANSI)
• IEEE Std 1070-1988 Guide for the Design and testing of Transmission Modular Restoration Structure Components (ANSI)

Electric Machinery 1995 Edition

• IEEE Std 11-1980 (Reaff 1992) Standard for Rotating Electric Machinery for Rail and Raod Vehicles (ANSI)
• IEEE Std 43-1974 (Reaff 1991) Recommended Practice for testing Insulation Resistance of Rotating Machinery (ANSI)
• IEEE Std 56-1977 (Reaff 1991) Gude for Insulation Maintenance of large AC Rotating Machinery (10 000kVA and larger) (ANSI)
• IEEE Std 67-1990 Guide for Operation and Maintenance of Turbine Generators
• IEEE Std 85-1973 (Reaff 1986) Standard Test Procedure for Airborne Sound Measurements on Rotating Electric machinery
• IEEE Std 95-1977 (Reaff 1991) Recommeded practice for Insulation Tetsing of Large AC rotating Machinery with High Direct Voltage (ANSI)
• IEEE Std 112-1991 Standard Test Procedures for Polyphase Induction Motors and Generators (ANSI)
• IEEE Std 113-1985 Guide: Test Procedures fir DC Machines (ANSI)
• IEEE Std 115-1983 (Reaff 1991) Guide: Test Procedures for Synchronous Machines (ANSI)
• IEEE Std 115A-1987 Standard procedures for obtaining Synchronous Machine Parameters by Standstill Frequency Response Testing
• IEEE Std 116-1975 (Reaff 1982) Standard test procedure for Carbon Test Brushes
• IEEE Std 117-1974 (Reaff 1991) Standard test Procedure for evaluation of Systems of Insulating Material for Random Wound AC Eclectric machinery (ANSI C50.32-1976)
• IEEE Std 252-1977 (Reaff 1984) Standard Test procedure for Polyphase Induction Motors having Liquid in the Magnetic gap (ANSI)
• IEEE Std 275-1992 Recommended Practice for Thermal Evaluation of Insulation Systems for Alternating-Current Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated 6900V and Below (ANSI)
• IEEE Std 290-1980 (Reaff 1986) Standard for Electric Couplings: part I-General Rating Performance techniques, Part II- Tets Procedures (ANSI)
• IEEE Std 304-1977 (Reaff 1991) Standard test procedure for Evaluation and Classification of Insulation Systems for DC Machines (ANSI)
• IEEE Std 429-1994 Recommended practice for thermal Evaluation of Sealed Insulation Systems for AC Electric machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated 6900V and Below
• IEEE Std 432-1992 Guide for Insulation Maintenance for Rotating Electrical Machinery (5hp to less than 10000hp) (ANSI)
• IEEE Std 433-1974 (Reaff 1991) Recommended Practice for Insulation and Testing of Large AC Rotating Machinery with High Voltage at very low frequency (ANSI)
• IEEE Std 434-1973 (Reaff 1991) Gude for Functional Evaluation of Insulation Systems for large High-Voltage Machines (ANSI)
• IEEE Std 492-1974 (Reaff 1986) Guide for Operation and Maintenance of Hydro-generators (ANSI)
• IEEE Std 522-1992 Guide for testing Turn-to-Turn Insulation on Form wound stator coils for alternating current rotating electric machines (ANSI)
• IEEE Std 792-1987 (Reaff 1995) Trial-Use recommended Practice for the Evaluation of the Impulse Voltage Capability of Insulation Systems for AC Electric machinery Employing Form-Wound Stator Coils (ANSI)
• IEEE Std 1129-1992 Recommended Practice for Monitoring and Instrumentation of turbine Generators

Distribution, Power and Regulating Transformers C57 1995 edition

• Draft IEEE Std 62-1995 Guide for Diagnostic Field Testing of Electric Power Appratus
• IEEE Std 259-1994 Standard test Procedure for the evaluation of Systems of Insulation for the Speciality Transformers
• IEEE Std 637-1985 (Reaff 1992) Guide for the Reclamation of Insulating Oil and Criteria for Its Use (ANSI)
• IEEE Std 638-1992 Standard for Qualification of Class 1E Transformers for Nuclear Power Generating Stations
• IEEE Std 799-1987 (Reaff 1992) Guide for Handling And Disposal of Transformer Grade Insulating Liquids Containing PCBs (ANSI)
• IEEE Std C57.12.00-1993 Standard General Requirements for Liquid-Immersion Distribution, Power, and Regulating Transformers (ANSI)
• IEEE C57.12.01-1989 Standard General Requirements for Dry-type Distribution and Power Transformers Including Those with Solid Cast and/or Resin-Encapsulated Windings
• ANSI C57.12.10-1988 Safety Requirements 230Kv and Below 833/958 Through 8333/10 417 kVA, Single-Phase, and 750/862 Through 60 000/80 000/100 kVA, Three Phase Without Load Tap Changing; and 3750/4687 Through 60 000/80 000/100 000 kVA with Load Tap Changing
• IEEE C57.12.11-1980 Guide for Installation of Oil-Immersed Transformers (10 MVA and Larger, 69-287 kV Rating) (ANSI)
• IEEE C57.12.12-1980 Guide for installation of Oil-Immersed EHV Transformers 345 kV and Above (ANSI)
• ANSI C57.12.20-1988 Requirements for Overhead-Type Distribution Transformers, 500kVA and Smaller; High Voltage, 34500Volts and Below; Low Voltage, 7970/13 800 Y Volts and Below
• ANSI C57.12.22-1989 Rquirements for Pad-Mounted, Compartmental-Type Self-Cooled, Three Phase Distribution Transformers with High-Voltage Bushings, 2500kVA and Smaller; High-Voltage, 34500 GrdY/19 920 Volts and Below; Low Voltage, 480 Volts and Below
• IEEE C57.12.23-1992 Standard for Transformers - Underground-type, Self-Cooled, Single-Phase Distribution Transformers with Seperable, Insulated, High-Voltage Connectors; High Voltage(24940 GrdY/14 400V and Below) and Low Voltage (240/120V, 167kVA and smaller)
• ANSI C57.12.25-1990 Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distribution Transformer with Seperable Insulated High-Voltage Connectors; High Voltage, 34500 GrdY/19920 Volts and Below; Low Voltage 240/120V; 167kVA and smaller)
• IEEE C57.12.26-1992 Standard for Transformers - Pad-Mounted, Compartmental-Type, Self-Cooled, Three Phase Distribution Transformers for use with Seperable Insulated High-Voltage Connectors, High Voltage, 34500 GrdY/19920V and Below; 2500kVA and Smaller
• ANSI C57.12.29-1991 Switchgear and transformers - Pad-Mounted Equipment - Enclosure Integrity for Coastal Enviornments
• IEEE C57.12.44-1994 Requirements for Secondary Network Protectors
• ANSI C57.12.50-1981 (Reaff 1989) Requirements for Ventilated Dry-Type Distribution Transformers, 1 to 500kVA, Single-Phase, and 15 to 500kVA, Three-Phase with High-Voltage 601 to 34500V, Low Voltage 120 to 600V
• ANSI C57.12.51-1981 (Reaff 1989) Requirements for Ventilated Dry-Type Power Transformers, 501 kVA and larger, Three Phase, with High-Voltage 601 to 34500V, Low Voltage 208Y/120 to 4160V
• ANSI C57.12.52-1981 (Reaff 1989) Requirements for Sealed Dry-Type Power Transformers, 501 kVA and larger, Three Phase, with High-Voltage 601 to 34500V, Low Voltage 208Y/120 to 4160V
• ANSI C57.12.55-1987 Conformance Standard for Transformers - Dry type Transformers used in Unit Installations, including Unit Subststions
• IEEE C57.12.56-1986 (Reaff 1993) Standard Test Procedure for Test Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution transformer (ANSI)
• ANSI C57.12.57-1987 (Reaff 1992) Standard for Transformers - Ventilated Dry-type Netowrk transformers 2500kVA and Below, Thre phse with High Voltage 34500V and Below, Low Voltage 216Y/125 and 480Y/277V - Requirements
• IEEE C57.12.58-1991 Guide for Conducting a Transient Voltage Analysis of a Dry-Type Transformer Coil (ANSI)
• IEEE C57.12.59-1989 Guide for Dry-Type Transformer Through-Fault Current Duration (ANSI)
• IEEE C57.12.60-1992 Trial-Use Standard test Procedure for Thermal Evaluation of Insulation Systems for Solid-Cast and Resin-Encapsulated Power and Distribution Transformers
• ANSI C57.12.70-1978 (Reaff 1993) Terminal Markings and Connections for Distribution and Power Trasnformers
• IEEE C57.12.80-1978 (Reaff 1992) Sandard terminlogy for Power and Distribution transformers (ANSI)
• IEEE C57.12.90-1993 Standard Test Code for Liquid immersed Distribution, Power and Regulating Transformers and guide for Short-Circuit Testing of Distribution and Power-Transformers (ANSI)
• IEEE C57.12.91-1979 Test Code for Dry-Type Distribution and power Trasnformers
• IEEE C57.13-1993 Standard Requirements for Instrument Transformers
• IEEE C57.13.1-1981 (Reaff 1992) Guide for Field testing of Relaying Current Transformers (ANSI)
• IEEE C57.13.2-1991 Conformance Test Procedures for Instrument Transformers (ANSI)
• IEEE C57.13.3-1983 (Reaff 1990) Guide for the Grounding of Instrument Transformers Secondary Circuits and Cases (ANSI)
• IEEE C57.15-1986 (Reaff 1992) Standard Requirements, Terminology, and Test-Code for Step Voltage and Induction-Voltage Regulators (ANSI)
• IEEE C57.19.00-1991 Standard General Requirements and test Procedure for Outdoor Power Apparatus Bushing (ANSI)
• IEEE C57.19.01-1991 Standard Performance Characteristics and Dimensions or Outdoor Power Apparatus Bushing (ANSI)
• Draft C57.19.100 Guide for Application of Power Apparatus Bushings
• IEEE C57.19.101-1992 Guide for Laoding Power Apparatus Bushings (ANSI)
• IEEE C57.21-1990 (Reaff 1995) Standard Requirements, Terminology and test Code for Shunt Reactors over 500KVA (ANSI)
• IEEE C57.91-1981 (Reaff 1991) Guide for loading Mineral Oil Immersed Overhead and Pad Mounted Distribution Transformer Rated 500kVA and Less with 65C or 55C Average Winding Rise
• IEEE C57.92-1981 (Reaff 1991) Guide for Loading Mineral Oil Immersed Power Trasnformers upto and including 100 MVA with 55C or 65C Average Winding Rise (ANSI)
• IEEE C57.94-1982 (Reaff 1987) Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type general purpose Distribution and Power Transformer
• IEEE C57.95-1984 (Reaff 1991) Guide for laoding Liquid-Immersed Set-Voltage and Induction-Voltage Regulators (ANSI)
• IEEE C57.96-1989 Guide for Loading Dry-Type Distribution and Power Transformers (ANSI)
• IEEE C57.98-1993 Guide for Transformer Impulse Tests
• IEEE C57.99-1965 Guide for loading Dry-Type and oil-Immersed Current-Limiting Reactors
• IEEE C57.100-1986 (Reaff 1992) Standard Test Procedure for Thermal Evaluation of Oil-Immersed Distribution Transformer (ANSI)
• IEEE C57.104-1991 Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers (ANSI)
• IEEE C57.105-1978 (Reaff 1992) Guide for Application of Transformer Connections in Three Phase Distribution Systems (ANSI)
• IEEE C57.106-1991 Guide for Acceptance and Maintenance of Insulating Oil in Equipment (ANSI)
• IEEE C57.109-1993 Guide for Liquid-Immersed Transformer through Fault-Current Duration (ANSI)
• IEEE C57.110-1986 (Reaff 1982) Recommended Practice for Establishing Transformer Capability when Supplying Nonsinusoidal Load Currents (ANSI)
• IEEE C57.111-1989 (Reaff 1995) Guide for Acceptance of Silicone Insulating Fluid and its Maintenance in Transformers
• IEEE C57.113-1991 Guide for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt Reactors
• IEEE C57.114-1990 Seismic Guide for Power Transformers and Reactors (ANSI)
• IEEE C57.115-1991 (Redesignation of IEEE Std 756, Trial Use May 1984) Guide for Loading Mineral-Oil Immersed Power Transformers Rated in Excess of 100MVA (65C Winding Rise) (ANSI)
• IEEE C57.116-1989 Guide for Transformers Directly Connected to Generators (ANSI)
• IEEE C57.117-1986 (Reaff 1992) Guide for Reporting Failure Data for Power Transformers abd Shunt Reactors on Electric Utility Power Systems (ANSI)
• IEEE C57.120-1991 Loss Evaluation Guide for Power Transformers abd Reactors (ANSI)
• IEEE C57.121-1988 (Reaff 1995) Guide for Acceptance and Maintenance of Less Flammable HydroCarbon Fluid in Transformers (ANSI)
• IEEE C57.124-1991 Recommended Practice for Detection of Partial Discharges and the Measurement of Apparent Change in Dry-Type Transformers (ANSI)
• IEEE C57.125-1991 Guide for Failure Investigation, Documentation, and Analysis for Power Transformers and Shunt Reactors (ANSI)
• IEEE Draft C57.131-1995 Guide for the Application of Metal Oxide Sure Arresters for AC Systems

Electromagnetic Compatibility 1996 Edition

• IEEE Std 139-1988 (Reaff 1993) Recommended Practice for the Measurement of Radio Frequenecy Emission from the Industrial, Scientific and Medical (ISM) Equipment Installed on User Premises (ANSI)
• IEEE Std 140-1990 Recommended Practices for Minimization of Interfernce from Radio Frequency Heating Equipment (ANSI)
• IEEE Std 187-1990 Standard on Radio Receivers: Open Field of Measurement of Spurious Radiaiton from FM and Television Broadcast Receivers (ANSI)
• IEEE Std 211-1990 Standard Deinition terms for Radio Wave Propgation (ANSI)
• IEEE Std 213-1987 (Reaf 199) Standard Procedure for Measuring Conducted Emission in the Range of 300kHz to 35MHz from Television and FM Broadcast Rceivers to Power Lines (ANSI)
• IEEE Std 291-1991 Standard Methods for Measuring Eletromagenetic Field Strength of Sinusoidal Coninous Waves, 30Hz to 30GHz (ANSI)
• IEEE Std 299-1991 Standard Method of Measuring the Effectiveness of the Electromagnetic Sheilding Enclosures (ANSI)
• IEEE Std 376-1975 (Reaff 1993) Standard for the measurement of impulse strength and impulse bandwidth (ANSI)
• IEEE Std 377-1980 (Reaf 1991) Recommended Practice for Measurement of Spurious EMission from Land-Mobile Commmunication Transmitters (ANSI)
• IEEE Std 430-1986 (Reaff 1991) Standard Procedures for the Measurement of Radio Noise form Overhead Power Lines and Substations (ANSI)
• IEEE Std 469-1988 (Reaff 1994) Recommended Pracice for Voice-Frequency Electrical-Noise Tests of Distribution Transformers (ANSI)
• IEEE Std 473-1985 (Reaff 1991) Recommended Practice for an Electromagnetic Site Survey (10kHz to 10GHz) (ANSI)
• IEEE Std 475-1983 (Reaff 1994) Measurement Procedure for the Field Disturbance Sensor 9rf intrusion Alarm) (ANSI)
• IEEE Std 518-1982 (Reaff 1990) Guide for the installation of Electric Equipment to Minimize Noise inputs to controllers from external sources (ANSI)
• IEEE Std 539-1990 Standard Definitions of terms Relating to Corona and Field Effects of Overhead Power Lines (ANSI)
• IEEE Std 644-1994 Standard procedures for the measurement of Power Frequency Electric and Magnetic Fields from AC power lines
• IEEE Std 776-1992 Guide for Inductive Coordination of Electric Supply and Communication Lines
• IEEE Std 1140-1994 Standard procedures for the measurement of Electric and Magnetic fields from Video Display terminals (VDTs) from Hz to 400MHz
• IEEE C37.90.2-1995 Standard Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers
• ANSI C63.2-1987 American National Standard for Electromagnetic Noise and Field Strength, 10kHz to 40GHz Specifications
• ANSI C63.4-1992 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9kHz to 40GHz
• ANSI C63.5-1988 American National Standard for Calibration of Antennas Used for Radiated Emission Measurement in Electromagnetic Interference (EMI) Control
• ANSI C63.6-1988 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
• ANSI C63.7-1992 American National Standard Guide for the Construction of Open Area Test Sites for performing Radiated Emission Measurements
• ANSI C63.12-1987 American National Standard Recommended Practice for Electromagnetic Compatibility Limits
• ANSI C63.13-1991 American National Standard Guide on the Application and Evaluation of EMI Power Line Filters for Commercial Use
• ANSI C63.14-1992 American National Standard Dictionary for the Technolohies of Electromagnetic Compatibility (EMC), Electromagnetic Pulse (EMP), and Electrostatic Discharge (ESD) (Dictionary of EMC/EMP,ESD Terms and Definitions)
• ANSI C63.16-1993 American National Standard Guide for Electrostatic Discharge Test Methodology and Criteria for Electronic Equipment
• C95.1-1991 IEEE Standard Safety Levels with the Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3Khz to 300kHz (ANSI)
• C95.2-1982 American National Standard Radio Frequency Radiation Hazard Warning Symbol
• C95.3-1991 IEEE Recommended Practices for the Measurement of Potentially Hazardous Electromagnetic Fields - RF and Microwave (ANSI)
Back

 Student Branch Webmaster: ieee@is2.dal.ca